Products tagged with 'hand tools'

View as Grid List
Sort by
Display per page

14-Piece Ball Joint Adapter Set

This tool kit is designed to be used on all cars, vans and light trucks which have press-fit type ball joints. All tools are packed in a handy plastic case.
$108.62 $59.99

20-Piece Wheel Bearing Tool Kit

Front wheel bearing removal tool. 20-piece tool kit in a hard plastic case. This set enables you to replace the wheel bearings of almost any car brand.
$161.96 $87.95

22 pcs Brake Caliper Piston Rewind Tool Kit

Brake disc caliper wind back tool set compatible with most popular car brands. This 22-piece set consists of two reaction plates, two pullers and seventeen adaptors.
$74.15 $29.95

3" Vise Clamp

A very versatile Vise, jaws have a 50mm-2” holding capacity. Vise is a clamp on type to bench or table-top, features swivel head full rotation and tilts to 45o at any position. A very functional and yet economical vise and is well made.
$99.95 $24.95

5" Bench Vise with Swivel

360 degree double locking swivel base allows turning in any direction after mounting
$139.95 $59.99

5-Piece Inner Bearing Puller Set

This blind inner bearing puller set has a split collet with an internal puller which is suitable for extracting bearings from blind housings.
$89.95 $49.95

9 Ways Steel Slide Hammer Axe/Bearing/ Dent/Hub/Gear Puller Set - 17 pcs

This nine ways slide hammer puller set is designed for pulling flange-type rear axles and front-wheel drive hubs.
$179.59 $72.95

Ball Joint Adapter Set

This tool kit is designed to be used on all cars, vans and light trucks which have press-fit type ball joints. All tools are packed in a handy plastic case.
$108.62 $63.90

Ball Joint Adapter Set

This tool kit is designed to be used on all cars, vans and light trucks which have press-fit type ball joints. All tools are packed in a handy plastic case.
$108.62 $62.99

Bearing Splitter and Gear Puller Set

This bearing separator and puller set is designed for removing bearings on your car. Included in the set is a forcing screw with bearing splitters which may be used separately or in combination with other pullers or tools.
$129.95 $59.99

Benz/BMW Fan Service Clutch Holder Wrench Set

This fan service wrench set allows servicing of different areas of repair that require a specialty tool due to their confined locations.
$149.95 $86.99

Brake Caliper Piston Wind Back Tool Kit

This brake caliper wind back tool kit is widely compatible with many car brands. It provides quick and efficient brake servicing when you want to replace your brake pads.
$179.95 $69.99

Camshaft Alignment Engine Timing Tool for Volvo

This camshaft alignment engine timing tool set for Volvo covers a comprehensive set, enabling the correct camshaft timing to be performed on Volvo engines when replacing the timing belt.
$104.77 $72.95

Carburetor Vacuum Synchronizer Gauges Tool Kit

This carburetor vacuum synchronizer gauges tool kit is an ideal choice for carburetor synchronization.
$128.87 $67.95

Chain Cutter Breaker Riveting Rivet Tool set

This item is designed to rivet chain links. You can form an endless chain as long as you want with its help. It can also work as a chain breaker by pushing the pin out. Our product is universal and it can break or join most drive chain from #35 to #630.
$43.67 $29.95

Cooling System & Radiator Cap Pressure Test

This 14-piece test kit for radiator pressure and universal cooling is suitable for almost any type of car and comes with a hard plastic carrying case.
$132.42 $77.90

Custom Built Bush / Bearing / Seal Driver Master Set Discs 51 pcs

This master set allows you to build your own custom bushing driver. It has every size you will ever need for most vehicles. Just select the required sizes and assemble your driver tool.
$187.43 $72.99

Cylinder Leak Detector Set

This cylinder leak detector set gives you valuable information about the engine’s compression. Pressurized air is supplied to each cylinder, and the rate of leakage is measured in percent loss from 0% to 100%. This set comes complete with two adapters for most applications.
$96.65 $38.99

Diesel Engine Timing Locking Tools Kit Set for Chrysler LDV 2.5 / 2.8

This timing tool set for Chrysler and LDV Maxus is designed to time 2.5 / 2.8 CRD belt drive engines.
$70.88 $39.95

Diesel Injector Seat Cutter Set

This injector seat cutter set is used to clean and recut injector seats on modern common rail engines.
$99.95 $65.99

Exhaust Muffler Tail Pipe Expander

This exhaust muffler tail pipe expander is designed to quickly and easily straighten out clamp dents in mufflers and tailpipes. This tool is made of drop forged steel.
$78.22 $43.95

Harmonic Balance Puller Set 45 pcs

This harmonic balance puller set is designed for removing harmonic balancers, gear pulleys, steering wheels and flywheels.
$53.31 $34.95

Hose Clamp Plier Remover Set

This hose clamp plier set has in total 7 different pliers which allows for extra reach and locking of clamps into open position. Included in this set is a screw driver with interchangeable handles and a hose remover with special hooks.
$115.59 $56.99

Metric Tap and Die Set with Case - 45 pc

High-quality tap & die set is precision machined to exacting standards. Tools feature a Rockwell hardness of 58-61 hrc. Made of heat-treated, rust-resistant tungsten steel. Includes several die and tap wrenches, screwdriver, 20 dies and 20 taps, which all fit in a storage case.
$189.95 $118.95

Radiator Pressure Tester with Vacuum Purge and Refill Kit

This radiator pressure tester tool kit can be used to detect internal engine leaks caused by blown head gaskets or cracked blocks and heads.
$511.64 $94.95

Spring Auto Car Coil Spring Compressor Clamp

This set of 2 auto car coil spring compressor clamps is ideal for both professionals and home users to safey remove coil springs.
$90.05 $29.99

Thread Repair & Workshop Kit Auto Garage Tool M5 M6 M8 M10 M12

This thread repair kit contains 131 pieces of tools, ideal for both hobbyists and professionals.
$119.95 $48.79

Timing Tool Set for VAG 1.6 & 2.0 TDI

This 10 pcs timing tool set is ideal assistance to lock the camshaft and crankshaft, assemble and disassemble fuel injection pumps and water pumps, change the timing belt and fix the balance shaft. Made in high-quality, this timing tool kit is designed for long life in daily workshop use.
$75.95 $41.01

Tool Set Nut Splitter Cracker Remover Extractor - 4 pc

This 4pc nut splitter set is professional for commercial or occasional use and is designed to remove stubborn / stuck nuts.
$89.95 $41.95

Universal Automotive Mechanics Metric Kit O-ring Assortment with a Case 419 Pieces

This is our 419 pc universal O-ring assortment kit, which will be used in electrical appliances, automobile and motorcycle accessories, cylinder, hydraulic press, oil pump, sanitary ware, bearing, and antenna.
$79.95 $22.99

Workshop Storage Tools Table

This is our heavy duty steel frame garage workbench, which is made of solid steel and has two roll-out drawers.
$312.25 $187.95

Workshop Storage Tools Table

This workbench is ideal for both professional and personal use. Thanks to the large and stable work surface, you can efficiently work on larger workpieces.
$310.96 $181.95